Select Page

It is no secret that Sauer products are some of the best. They are high quality and made to last a lifetime. You should make sure that when you decide to repair your own pump that you are doing it properly. This is especially true if you are going to use the recommended Sauer Danfoss Hydraulic Repair kit. Professional hydraulic pump repair shouldn’t be left to chance if you want to keep your equipment running as good as new for a very long time.

One of the most common problems experienced with Sauer pump-and-dashers is a gradual loss of hydraulic pressure which can be caused by two potential sources. These two causes are either a loss of refrigerant or an increase in atmospheric pressure. Because pressure affects the speed with which your equipment moves, and the larger your machine is, the amount of pressure in the system will affect how fast your gear pumps move. The greater the pressure, the slower your moving parts will work.

Sauer Danfoss Hydraulic Repair

You may find that you are one of the unlucky people whose Sauer power pumps stop working for whatever reason. There is an easy way to figure out what the problem is. Check your blower hoses to see if they are leaking, because if they are not leaking then there is a much more likely cause for the stoppage. Use a damp cloth to check the connection areas on your s 45cc double wide, double engraving, and double shafts hydraulic pumps.

Another cause for a Sauer Danfoss Hydraulic Pump Repair is poor maintenance of the hydraulic fluid. If you have a reliable and appropriate type of hydraulic fluid, you should never have any problems with your power pumps. If you do, you need to have your hydraulic fluid changed immediately and have your hydraulic fluid lines cleaned out. This way, you will eliminate any chance for the waste fluid or other material to mix with your hydraulic fluid, causing a clog and subsequent breakdown of your hydraulic system.

If you find that you have a hydraulic fluid leak, you will have to first locate the source of the leak. Next, you will need to have your hydraulic fluid pumped back into your hydraulic system. An experienced technician can usually locate the source of the leak and determine how to best solve the problem. Sometimes, simply changing out the filter on your hoses might solve the problem. It could be that the valve between the filter and hydraulic fluid is causing the problem.

To avoid a Sauer Danfoss Hydraulic Repair, you should also know how to handle your tractor correctly and safely. Never open your tractor while it is powered up. This can cause serious injury or even death due to the sheer force of the moving vehicle. Also, if you are going to perform a hydraulic repair on your own, wear safety gear such as gloves, safety glasses, a hard hat, and proper clothing. Never repair your tractor while leaning over the side as this can also cause serious injury.